FORGOT LOGIN?

 Featured
 Products

 Services
 
ACTUATORS
TF Series
The new TF Series delivers the same quality and reliability the spring return actuator line is famous for - in a compact, cost-effective, and easy-to-install package.
FS Fire & Smoke Actuation
Ensuring the safety of human life and property in buildings is one of the toughest demands that builders and owners are called upon to face. In order to prevent the spread of fire & smoke through the HVAC ducting systems of buildings, fire and smoke dampers are used to seal off individual zones should a fire occur.
CONTROL VALVES
CCV Series w/ TF
Control valve applications often require compact assemblies with reliable mechanical fail-safe. Control valve applications requiring a quality fail-safe are ideal for Belimo CCVs coupled with the new TF series actuators.
Electronic Zone Valves
The ZONE series valve is typically used on fan coil units, baseboards or other hydronic applications where fail safe operation or 2-wire control is required.
CURRENT & POWER MONITORS
RIBXGTA
Enclosed Split-Ring Adjustable .75-150 Amp Current Sensor with Terminal Strip Output & LED Indicators
CT & CU Series
The CT and CU 800 Series provides a wide selection of current switching and transducing options in small and durable solid-core and split-core designs.
DETECTORS
SM-501 Series
The SM-501 series Duct Smoke Detector provides early detection of smoke and products of combustion present in air moving through HVAC ducts in Commercial, Industrial and Residential applications.
310e CO2
This state-of-the-art instrument measures carbon dioxide (CO2) concentrations in the parts-per-million (ppm) range and is ideal for applications ranging from large buildings with complex HVAC systems to home gyms.
FIRESTATS
TC Series
The TC Duct Limit Controls contain a Helix Bi-metal that senses rapid increases in duct temperature, such as fire. The Bi-metal causes the normally closed contacts to open and turn off the power.
134-1710
features The 134 High and Low Temperature Detection Pneumatic Thermostats automatically “lockout ” at set point and require manual reset.
FLOW
AFS 222
The Model AFS-222 is a general pur- pose proving switch designed for HVAC and Energy Management ap- plications. It may be used to sense positive, negative, or differential air pressure.
F61KB-11C
The F61 Series Flow Switches respond to fluid flow in lines carrying water, ethylene glycol, or other nonhazardous fluids. Variety of paddle sizes are available.
FREEZESTATS
TS1 & TS2 Series
Provide low limit temperature control and/or indication in operating dampers, valves, and compressor or fan motors in HVAC systems.
>Manual and Auto reset models available
>SPDT or DPDT switching action
A70HA-1C
The A70 Series temperature control incorporates a vapor-charged sensing element. 4-wire, 2 circuit contact block that contains two isolated sets of contacts.
HUMIDITY
HU 224/225 Series
The HU-224/225 is an extremely fast, stable and accurate humidity transducer designed for harsh environments. The polymer capacitance sensor is not affected by harsh contaminants, condensation, fog or extremely high humidity over a prolonged period of time.
H200 Humidistat
The H200 series low voltage, microcomputer-based PI humidistats are designed for accurate humidification and/or dehumidification control in non-corrosive commercial applications.
HVAC EQUIPMENT
Air Control Dampers
Nailor manufactures a comprehensive range of control dampers suitable for all commercial HVAC applications, from manual balancing dampers to the industry leading ultra-low leakage, premium quality, Series airfoil control dampers.
Danfoss (Graham) VFDs
The VLT® HVAC Drive unleashes the full potential of HVAC. Built on Danfoss new modular plug-and-play platform and dedicated to HVAC applications, the VLT® HVAC Drive makes HVAC operation childs play.
INSTALLATION MATERIAL
Wire & Cable
By stocking a wide variety and large inventory of wire and cable nationwide, BCCI makes it simple and convenient to get the material you need quickly.
Wire Duct w/ Cover
All wiring ducts come complete with covers. Available in white or gray.
ENCLOSURES & PANELS
BCP UL Series
NEMA 1 Enclosures designed for indoor application requirements.
>Steel fabricated doors and enclosures
>Doors open either left or right
>Standoffs for optional sub-panels
>Knockouts on all four sides
>Optional colors (No Extra Charge)
MH Series
MH Series NEAM 1 enclosures. Available in a variety of sizes, these enclosures provide many useful features. Small sizes have screw lock covers and the larger are equipped with key-lock latch doors, most of which are full-hinge.
PNEUMATIC PRODUCTS
192/194 Retrostat Pneumatic Room Thermostats
The Powerstar Retroline Retrostat Pneumatic Room Thermostat converts most existing pneumatic room thermostats to a Powerstar 192 DA or RA, 2-pipe, single or dual setpoint unit.
CSC 3000 Series
Reset Volume Controllers

The CSC-3000 series Reset Volume Controllers are designed for use on variable air volume terminals units in HVAC systems.
POWER SUPPLIES
PS-200 Series
The PS-200 is the most reliable, indestructible, stable and versatile power supply in the industry and requires the least amount of installation time.
>Two unique chassis options are available.
>Accepts either 115, 230 or 24 VAC input
PSH500A
Enclosed 500VA Power Supply with Five 100VA Class II Outputs,240/120 Vac to 24 Vac
Also available Sub-Panel mounted
PRESSURE
PR-274/275 Series
The PR-274/275 incorporates a new micro-machined glass-on-silicon (Gl-Si) capacitance sensor. This technology revolutionizes very low pressure measurement.
1900 Series
1900 series combines advanced design and precision construction to make these switches able to perform many of the tasks of larger, costlier units. Designed for air conditioning service, they also serve many fluidics, refrigeration, oven and dryer applications.
RECEIVER CONTROLLERS
CCC-1001
>Pneumatic proportional control device.
>Use with pneumatic transmittes or any 3-15 psig pneumatic device, for controlling valves and actuactors in HVAC systems.
195-0003
The RC 195 Receiver-Controller is a pneumatic instrument that receives 1, 2, or 3 pneumatic inputs. It produces a pneumatic control signal based on the net pneumatic input and the mechanical settings.
RELAYS & CONTACTORS
RIBUIC
Enclosed Relay 10 Amp SPDT with 10-30 Vac/dc/120 Vac Coil
PAM Relays
The PAM Series Relays are encapsulated multi-voltage devices with iiflyinglt leads that offer versatile, reliable performance in a convenient package. Several of the versions contain a red LED which indicates when the relay coil is energized.
TEMPERATURE
TE-700 Series
TE-700 temperature sensors offer the industry’s most extensive range of enclosure, installation and sensor types to satisfy all HVAC, industrial and commercial applications.
A-500 Thermowells
The A-500 Thermowell is machined from a single piece of brass or stainless steel to provide a rugged and leak proof well for MAMAC temperature sensors.
THERMOSTATS
T901
The T901 series proportional thermostats are microcomputer based, proportional and integral (PI) devices with one contact time proportioning output.
Electric Thermostats
>Competitively priced
>Optional energy-saving features:
-Fan cycling
-Minimum/maximum setpoint limitations
-50-85°F (10-30°C) >2 or 4 Pipe heat / cool fan coil units
TRANSDUCERS & INTERFACES
EP Transducers
>No air consumption
>Field selectable 4-20 mA, 0/5 or 0/10 VDC input
>Auto/manual switch (EP-313 only)
>Smallest size available in the industry
DRN3.1
Analog/PWM/Floating Point to Specified Resistance
TRANSFORMERS
TR100VA001
Transformer 100VA,120-24V,single hub,ClassII UL Listed US/Canada, Circ. Br.
TR40VA040
Transformer 40VA, 240/208/120-24V Dual Terminal Secondary,1 hub,ClassII UL List US/Can,3A Fuse
 

 
www.aamextras.com | © 2000 Building Controls Connection Inc
Send Comments to hvac@aamextras.com